How Much to Install Vinyl Plank Flooring: Costs Line by Line
How much to install vinyl plank flooring for one room: order area, plank price per sq ft, trim, pro labor and a 200 sq ft example built from retailer pages.

The box says $2.09 a square foot, so 200 square feet looks like $418 (our arithmetic). Then the order has to cover waste, the planks need trim at the doors and walls, and either you spend a weekend or someone charges by the square foot. Done by a pro, the same room lands nearer $1,100 to $2,000 on the numbers below. This page builds that number in the order you would, from measuring to the quote.
The short answer
| Line | Number | Where it comes from |
|---|---|---|
| Overage on the order | 8% on one retailer’s order page; 10% to 15% for a room with many angles | Flooret’s product page; Fixr’s guide |
| Planks, per sq ft (reference) | $2.09 to $4.49 across the three listings read | One Home Depot listing, one Flooret listing |
| Pro labor, per sq ft | Basic click-lock starts at $2.49; $3 to $5 in its cost guide | Home Depot’s service pages |
| Installed, per sq ft | $5 to $9 on average | Home Depot’s cost guide |
| A 200 sq ft room, planks and labor (our arithmetic) | $492 to $1,008 DIY; $1,092 to $2,008 with a pro | Section 5 below |
Trim, old-floor removal and a vapor barrier come on top (section 3).
How many square feet should you order?
Measure each rectangle of the room, multiply length by width and add them up (our suggestion). Then add overage. The order page for one maker’s planks recommends an extra 8% for potential waste and rounds the quantity up to whole boxes, while Fixr’s cost guide, which covers vinyl plank in general including thinner standard planks, says a room with many angles, nooks or jogs needs about 10% to 15% more material. Box coverage is not standard: the three listings priced below hold 21.42, 22.46 and 23.48 sq ft.

For a plain 200 sq ft room at 8% that is 216 sq ft. At 21.42 sq ft a box, 216 sq ft is 10.08 boxes, so you buy 11 (our arithmetic). The last fraction of a box is a real cost, so run the division with the box size of the line you pick.
What do the planks cost per square foot?
Three listings show the spread, each at the price payable without a code. The Home Depot figure is the case price divided by the case coverage (our arithmetic); the Flooret figures are the per-square-foot prices its page shows for a box.
- Low: a Home Decorators Collection Windover plank at Home Depot, $2.09 per sq ft ($44.77 for a 21.42 sq ft case). Price for reference only. It is 5.5 mm thick with a 20 mil wear layer and a pre-attached underlayment.
- Middle: Flooret’s Arbor in the Base model, $2.69 per sq ft (box of 23.48 sq ft). Price for reference only. It is 5 mm thick with a 20 mil wear layer and a 1 mm pad.
- High: the same colour in Flooret’s Signature model, $4.49 per sq ft (box of 22.46 sq ft). Price for reference only. It is 7 mm thick with a 40 mil wear layer and a 1.5 mm pad.
Material price varies with the type, construction, thickness, wear layer, design and brand, as one maker’s cost guide lists it. Across these three, the jump from $2.69 to $4.49 comes with a thicker plank and a wear layer twice as thick (our reading). Cost guides put the same thing as a range: $2 to $7 per square foot for vinyl plank material in general, thinner standard planks included, and $2 to $4 on Home Depot’s cost guide. For a head-to-head against laminate, see laminate vs vinyl plank flooring.
What else goes on the bill besides planks?
- Underlayment. Check whether the plank already has a pad before you buy one. Home Depot’s cost guide lists underlayment as commonly attached, and the Windover and both Flooret models above have one. One cost guide says vinyl plank should go down without an underlayment other than a vapor barrier in a basement or damp area. Flooret’s separate acoustic underlayment listing says it is not recommended under its vinyl planks with a pre-attached underlayment.
- Vapor barrier, for concrete or damp rooms. Flooret lists a 6 mil roll covering 400 sq ft at $60 (price for reference only), and Fixr puts a vapor barrier at $100 to $150 per room. One is a roll price and the other a per-room cost, so do not average them.
- Trim and transitions. Flooret’s 72 inch quarter-round is $49.50 a piece with a minimum order of 2, and its T-molding and reducer are the same price (price for reference only). Fixr gives $5 to $30 per threshold. In a 10 by 20 ft room the perimeter is 60 ft, which is ten 6 ft pieces, or $495 of quarter-round before you subtract door openings (our arithmetic). If you can reuse the existing baseboard or shoe moulding, this line shrinks (our suggestion).
- Adhesive and tools for glue-down: no first-party price was found for this page. Fixr says glue-down needs a heavy metal roller.
What does a pro charge to install it?
Labor numbers differ by source, and each is a different kind of figure:
- Home Depot’s vinyl plank installation page says basic click-lock installation starts at $2.49 per sq ft, with additional services priced separately.
- Home Depot’s cost guide lists labor at $3 to $5 per sq ft, and installed vinyl plank at $5 to $9 on average. An MSI guide gives the same $2 to $4, $3 to $5 and $5 to $9 split.
- Fixr’s guide says labor runs $1 to $4 per sq ft, lowest for peel-and-stick and higher for glue-down because the planks have to be rolled.
- This Old House’s guide, whose figures it says come from Angi, gives $3 to $10 per sq ft or about $36 an hour.
On Home Depot’s cost guide, the extras that move the quote include furniture removal, taking up the old floor, leveling and room size, as well as trim and stairs. Fixr puts old-floor removal at roughly $1 per sq ft and as much as $2 to $3 for floors that are very hard to remove, and says stairs add trim cost. Home Depot says leveling is charged on top when a room needs it and gives no figure. Home Depot offers a free measure and quote, so a quote is the fastest way to replace these ranges with your own.
What does a 200 sq ft room come to?
Take the 200 sq ft room from earlier, 216 sq ft ordered, with labor charged on the 200 sq ft measured (our assumption), and labor at the $3 and $5 ends of Home Depot’s cost guide. Each figure is the planks plus labor, rounded to the dollar (our arithmetic).
| Planks (price per sq ft, reference) | Boxes | DIY | Pro at $3 | Pro at $5 |
|---|---|---|---|---|
| Windover, $2.09 | 11 | $492 | $1,092 | $1,492 |
| Arbor Base, $2.69 | 10 | $632 | $1,232 | $1,632 |
| Arbor Signature, $4.49 | 10 | $1,008 | $1,608 | $2,008 |
The pro range is $5.46 to $10.04 per square foot over the 200 sq ft measured, which sits above Home Depot’s $5 to $9 because the order includes overage and the top plank is above that guide’s $2 to $4 materials range (our arithmetic). Fixr’s own 200 sq ft figures are $900 to $1,600 in its summary and $600 to $2,200 in its size table.
Add these only if they apply: trim (up to about $495 of quarter-round in this room), old-floor removal ($200 at $1 per sq ft, or $400 to $600 at $2 to $3), and a vapor barrier. Sales tax and shipping are not in the table. Putting this floor in a bathroom is one line in a bigger budget, which bathroom remodel cost lays out.
Where can you save, and what should a quote list?
- Do the clearing yourself. Home Depot’s guide says moving furniture out on your own can cut costs, and says taking up an old floor is best left to professionals unless you have experience.
- Check the floor before you order. Fixr says click-lock needs a flat, smooth subfloor and Home Depot charges leveling extra, so a flat floor keeps that line at zero (our reading).
- Order the right overage: 8% is one maker’s figure for waste and 10% to 15% is a cost guide’s for a room with angles, then round up to whole boxes as above.
- Skip an underlayment the plank already has, and ask what any underlayment line on a quote is for.
- If you lay it yourself, the steps are in how to install vinyl plank flooring. It is a more realistic DIY job for click-lock than for glue-down, which needs a heavy metal roller and is very hard to lift later.
For comparing quotes, one maker’s guide says to ask whether removal is included in the install price or listed separately, and what any underlayment or moisture line is for. Beyond that, a quote worth comparing lists (our suggestion): square feet measured and square feet ordered, the plank line and its per-sq-ft price, the install method, labor per sq ft, removal and disposal, subfloor prep, trim and transitions, stairs and furniture moving. For other projects of this size see home improvement projects.
Where these numbers come from
Plank, trim and vapor-barrier prices are from one Home Depot product page and Flooret’s own product pages, and installation ranges are from Home Depot’s service pages, Fixr (page dated January 2025), MSI’s and This Old House’s guides, each read on 15 November 2026 without a discount code. Boxes, order areas, totals and per-square-foot figures are our arithmetic.
Frequently asked questions
How much per square foot does it cost to install vinyl plank flooring?
It depends on whose number you use. Home Depot's cost guide puts vinyl plank at $2 to $4 per square foot for materials plus $3 to $5 for labor, and $5 to $9 installed on average. Fixr's guide, for vinyl plank in general including thinner standard planks, gives $2 to $7 for materials and $1 to $4 for labor, $3 to $11 installed. With the three planks priced on this page and Home Depot's labor range, a 200 sq ft room comes to roughly $1,100 to $2,000 hired out, before trim and removal (our arithmetic).
How much does it cost to install 1,000 square feet of vinyl plank flooring?
Fixr's size table gives $3,000 to $11,000 installed for 1,000 sq ft of vinyl plank, material and labor together. This Old House's guide, which says its figures come from Angi, gives $5,000 to $17,000 for 1,000 sq ft of standard vinyl plank with labor at $3 to $10 per square foot. The two guides differ by a wide margin, so get quotes for a floor that size.
Is it worth installing vinyl plank flooring yourself?
On Home Depot's guide labor is $3 to $5 per square foot, so doing it yourself keeps $600 to $1,000 in a 200 sq ft room (our arithmetic), less whatever tools you have to buy. Fixr calls peel-and-stick easy for DIY, and says glue-down is not, because it needs a heavy metal roller and is very hard to lift later.
Is vinyl plank cheaper than laminate to install?
In Fixr's guide, which covers vinyl plank in general, yes: for a 200 sq ft room it lists vinyl plank at $900 to $1,600 installed and laminate at $1,500 to $3,500. Our own comparison of four lines at one retailer, in our laminate vs vinyl plank flooring guide, found no consistent gap in per-square-foot price between the two, so compare the exact lines you are choosing between.
- #vinyl plank flooring
- #flooring cost
- #flooring installation
- #vinyl flooring cost